How to Troubleshoot Ice Maker Issues in Kenmore Elite Coldspot 26SSA?
Asked Dec 23, 20160 views1 answer
I am experiencing an issue with my Kenmore Elite Coldspot 26SSA #53603201 side-by-side refrigerator. The ice maker has stopped working. Before I removed the ice tray, it had ice in it, but I noticed a layer of ice on the white bottom plate, which makes me wonder if it may have overflowed. The ice maker's fingers are up and forward, and the ice bucket is not obstructing the beam or the flap. The lights are blinking normally. I let the ice maker dry out before reinstalling it, but it still isn’t functioning. I need help troubleshooting this issue.
Troubleshooting the Kenmore Elite Coldspot 26SSA Ice Maker Issue
Experiencing issues with your ice maker can be frustrating, especially when it's not producing ice as expected. Here, we will cover comprehensive troubleshooting steps for your Kenmore Elite Coldspot 26SSA side-by-side refrigerator's ice maker.
Initial Checks
-
Freezer Temperature
- Optimal Range: Ensure the freezer temperature is set between 0°F and 5°F (-18°C to -15°C). If the temperature exceeds 10°F (-12°C), the ice maker may not function efficiently.
- How to Check: Use an appliance thermometer to verify the temperature inside the freezer.
-
Ice Maker Position
- Ensure that the ice maker's fingers are in the down position. If they are stuck or malfunctioning, the ice maker will not operate correctly.
-
Ice Bucket and Beam Obstructions
- Confirm that the ice bucket is not obstructing the sensor beam or the flap. A blockage can prevent the ice maker from operating.
Troubleshooting Steps
Step 1: Inspect for Ice Blockages
- Remove Ice Tray: Take out the ice tray and inspect for any blockages or ice buildup beneath it.
Expert Answers
AP
Abe Pastor
Answered Dec 23, 2016
To troubleshoot your Kenmore Elite Coldspot `26SSA #53603201` ice maker, start by checking the freezer temperature. If it’s above 10 degrees Fahrenheit (-12°C), that could be why the ice maker isn’t producing ice efficiently. Ideally, the freezer should be set between 0 and 5 degrees Fahrenheit (-18 to -15°C) for optimal ice production.
Next, consider other components that might be causing the issue. One possibility is that a part of the ice maker assembly could be defective. While the water inlet valve seems to be functioning since it flows water, it’s still important to check the water flow and test the pressure. The water inlet valve requires a minimum pressure of 20 psi to work properly, so ensure that the pressure meets this requirement.
To isolate the problem, adjust the freezer temperature to the recommended range and check the water pressure. After making these adjustments, see if that resolves the issue. If you still have problems or need further assistance, feel free to reach out again.
Still need help?
Connect with verified experts who can solve your problem today.