How to Fix the F60 Error Code on Panasonic DMR-ES40V?
Asked Feb 23, 20130 views1 answer
I am experiencing an issue with my machine where the power light is off, and it won't eject the DVD and video inside. I have already tried unplugging it and reconnecting it, but that didn't resolve the problem. Additionally, the code displayed on the unit is now F60. I need help troubleshooting this issue.
Understanding the F60 Error Code on the Panasonic DMR-ES40V
The F60 error code on your Panasonic DMR-ES40V typically indicates a failure in the video processing board. This issue can prevent the unit from powering on, ejecting discs, and functioning properly. Below, we provide a comprehensive troubleshooting guide to help you resolve this issue.
Initial Troubleshooting Steps
Before diving into more complex solutions, try the following basic troubleshooting steps:
1. Power Cycle the Unit
- Unplug the Unit: Disconnect the power cord from the outlet.
- Wait: Leave it unplugged for at least 1 minute.
- Reconnect: Plug the unit back in.
- Power On: Turn the unit on using the power button.
This simple step can sometimes reset minor errors.
2. Attempt a Soft Reset
If the power cycle doesn't resolve the issue, try performing a soft reset:
- Power Off: Ensure the unit is off.
- Press and Hold Buttons: While the unit is off, press and hold the and buttons simultaneously.
Expert Answers
RL
Rofel Lantican
Answered Feb 23, 2013
The `F60` error code on your Panasonic `DMR-ES40V` typically indicates a problem with the video processing board. This board is located near the back of the unit and features an HDMI port along with some mini cables connecting to it.
To troubleshoot the issue, start by unplugging the unit for about a minute before plugging it back in. Once it powers up and you see the display, hold down the power button for at least ten seconds. This should put the unit into standby mode. After that, try turning it on normally using the power button to see if the error persists.
If that doesn’t work, you can perform a full reset. To do this, make sure the unit is powered off, then press and hold the Stop and Channel Up buttons while turning the unit back on. Keep holding those buttons for about five seconds. This reset might help clear the error.
Give these steps a try and see if they resolve the issue.
Still need help?
Connect with verified experts who can solve your problem today.